Linear Error: ±1%F.S.
Repeatability: ≤1%
Opacity N: (0 - 99.99)%
Light Absorption Coefficient K: (0 - 16) m⁻¹
Measured Components: CH4/CO2/H2S/O2 /H2/CO
Measurement Principle: CH4/CO2: NDIR; H2S/O2: ECD
Gas Sampling Method: Flow - guiding type
On - site Installation Method: Flange connection (DN40)
Detection Principle: Non - Dispersive Infrared Technology (NDIR)
Data Output: CO₂ concentration (mmHg), end - tidal CO₂, inhaled CO₂, respiratory rate
Communication Interface: RS - 232; RS - 485; USB
Power Input: 220VAC ± 22V
Communication: RS - 485/RS - 232, can be connected to Gasboard series smoke analysis equipment
Power Supply: 100 - 240VAC, 80W
Data Refresh: ≤1s
Output Method: CAN2.0
Measured Components: CO/CO₂/CH₄/H₂/O₂/C₂H₂/C₂H₄/CₙHₘ/Calorific Value
Measurement Principle: CO/CO₂/CH₄/C₂H₂/C₂H₄/CₙHₘ: NDIR; H₂: TCD; O₂: ECD
Applicable Engine Range: Engines of any size, at any speed, and with exhaust pipes of various specifications
Sampling Flow Measurement Accuracy: ≤ ±4% (Dilution ratio ≤ 15:1)
Applicable Media: Non - combustible gases such as air, flue gas, etc.
Applicable Pipeline Diameter: ≥ 0.5m
Measured Components: H₂S, O₂, CO, CO₂, CH₄
Measurement Principle: TDLAS
Measurement Components: H2, N2, O2, CO, CO2, CH4, C2H2, C2H4, C2H6, C3H6, C3H8, H2S
Measurement Range: 0 - 100% (Range can be selected according to on - site conditions)
Detected Gases: PM2.5, CO₂
Technical Principle: PM2.5: Laser scattering；CO₂: Single - light - source NDIR, dual - channel
Detection Principle: Non - Dispersive Infrared (NDIR) Detection Technology
Detected Gas Types: Electrolyte vapors such as DMC, EMC, EC
Measured Components: CH₄, CO₂, CₙHₘ*, Calorific Value
Measurement Principle: NDIR
अपनी पूछताछ सीधे हमें भेजें
